Shopping on line can be easy, simple and save you lots of money. It can also take a lot of your time, frustrate you, and result in unwanted purchases. Now the same can be said for regular high street shopping, but with the vast opportunity presented by the Internet it will pay you to spend a few minutes reading this and understanding how to better optimize your Electroplating shopping experience:

1. Compare - without doubt the biggest advantage that the Electroplating offers shoppers today is the ability to compare thousands of Electroplating at a time. This is a great thing, but not necessarily all the time! Too much can be daunting at times so take advantage of the great comparison sites and where possible let them do the hard work for you.

2. Research - if it has been said it will be on the internet. Ignorance is no longer a justifiable reason for buying the wrong thing. Take the time to research in detail everything that you could possible want to know about

3. Testimonials - don't know anybody that has bought a Electroplating? Wrong! If the Electroplating is good the internet will let you know. Use the Internet as a friend and get testimonials before you buy.

4. Questions - Got a question about Electroplating then search the Forums, FAQ's, Blogs etc. Don't be afraid to ask .....

5. Reputation - Never heard of the company selling Electroplating? Don't worry, no reason why you should know every company in the world, but you know someone that does! Use the internet to find out what people are saying about Electroplating and build up a picture of their reputation for sales, returns, customer service, delivery etc.

6. Returns - still worried that even after all of the above your Electroplating wont be what you want? Check out the returns policy. There is so much competition now that someone, somewhere is bound to offer the terms that you are comfortable with.

7. Feedback - happy with your Electroplating then let people know, after all you are depending on others people input in your buying decision, so why not give a little back.

8. Security - check for the yellow padlock on the Electroplating site before you buy, and the s after http:/ /i.e. https:// = a secure site

9. Contact - got a question about Electroplating, or want to leave a comment then check out the sites contact page. Reputable companies have them and respond.

10. Payment - ready to pay for your Electroplating, then use your credit card or PayPal! Be aware of companies that don't accept them, there may be genuine reasons but given the huge amount of choice you have when buying online there is no reason at all not to buy via credit card or PayPal.

Electroplating is the process of using electrical direct current to coat an electrically electrical conductivity object with a relatively thin layer of metal. The primary application of electroplating deposits a layer of a metal having some desired property (e.g., abrasion and wear resistance, corrosion protection, lubrication, improvement of aesthetic qualities, etc.) onto a surface lacking that property. Another application uses electroplating to build up thickness on undersized parts.

The process used in electroplating is called electrodeposition. It is analogous to a galvanic cell cell acting in reverse. The part to be plated is the cathode of the circuit. In one technique, the anode is made of the metal to be plated on the part. Both components are immersed in a solution called an "Electrolyte" containing one or more dissolved salt as well as other ions that permit the flow of electricity. A rectifier supplies a direct current to the cathode causing the metal ions in the electrolyte solution to lose their charge and plate out on the cathode. As the electrical current flows through the circuit, the anode slowly dissolves and replenishes the ions in the bath.{{cite book | last = Dufour | first = Jim | authorlink = | coauthors = | title = An Introduction to Metallurgy, 5th ed | publisher = Cameron | date = 2006 | location = | pages = IX-1 | url = | doi = | id = -->

Other electroplating processes may use a nonconsumable anode such as lead. In these techniques, ions of the metal to be plated must be periodically replenished in the bath as they are drawn out of the solution.Dufour, IX-2.

Process bar and the cathode is an iron spoon.

The anode and cathode in the electroplating cell are connected to an external supply of direct current, a battery or, more commonly, a rectifier.The anode is connected to the positive terminal of the supply, and the cathode (article to be plated) is connected to the negative terminal.When the external power supply is switched on, the metal at the anode is oxidation from the zero valence (chemistry) state to form cations with a positive charge.These cations associate with the anions in the solution. The cations are reduced at the cathode to deposit in the metallic, zero valence state. Example: In an acid solution, Copper is oxidized from an anode to Cu2+ by losing two electrons. The Cu2+ associates with the anion SO42- in the solution to form copper sulfate. At the cathode, the Cu2+ is reduced to metallic Cu by gaining two electrons. The result is the effective transfer of Cu from the anode source to a plate covering the cathode.

The plating is most commonly a single metallic chemical element, not an alloy. However, some alloys can be electrodeposited, notably brass and solder.

Many plating baths include cyanides of other metals (e.g., potassium cyanide) in addition to cyanides of the metal to be deposited. These free cyanides facilitate anode corrosion, help to maintain a constant metal ion level and contribute to conductivity. Additionally, non-metal chemicals such as carbonates and phosphates may be added to increase conductivity.

When plating is not desired on certain areas, stop-offs are applied to prevent the bath from coming in contact with the substrate. Typical stop-offs include tape, foil, lacquers, and waxes.Dufour, IX-3.

Strike Initially, a special plating deposit called a "strike" may be used to form a very thin (typically less than 0.5 Thou (unit of length) thick) plating with high quality and good adherence to the substrate. This serves as a foundation for subsequent plating processes. A strike uses a high current density and a bath with a low ion concentration. The process is slow, so more efficient plating processes are used once the desired strike thickness is obtained.

The striking method is also used in combination with the plating of different metals. If it is desirable to plate one type of deposit onto a metal to improve corrosion resistance but this metal has inherently poor adhesion to the substrate, a strike can be first deposited that is compatible with both. One example of this situation is the poor adhesion of electrolytic nickel on zinc alloys, in which case a copper strike is used, which has good adherence to both.Dufour, IX-2.

Current density The current density (amperage of the electroplating current divided by the surface area of the part) in this process strongly influences the deposition rate, plating adherence, and plating quality. This density can vary over the surface of a part, as outside surfaces will tend to have a higher current density than inside surfaces (e.g., holes, bores, etc.). The higher the current density, the faster the deposition rate will be, although there is a practical limit enforced by poor adhesion and plating quality when the deposition rate is too high.

While most plating cells use a continuous direct current, some employ a cycle of 8–15 seconds on followed by 1–3 seconds off. This allows high current densities to be used while still producing a quality deposit. In order to deal with the uneven plating rates that result from high current densities, the current is even sometimes reversed, causing some of the plating from the thicker sections to re-enter the solution. In effect, this allows the "valleys" to be filled without over-plating the "peaks." This is common on rough parts or when a bright finish is required.Ibid.

Brush electroplating A closely-related process is brush electroplating, in which localized areas or entire items are plated using a brush saturated with plating solution. The brush, typically a stainless steel body wrapped with a cloth material that both holds the plating solution and prevents direct contact with the item being plated, is connected to the positive side of a low voltage direct-current power source, and the item to be plated connected to the negative. The operator dips the brush in plating solution then applies it to the item, moving the brush continually to get an even distribution of the plating material. The brush acts as the anode, but typically does not contribute any plating material, although sometimes the brush is made from or contains the plating material in order to extend the life of the plating solution.

Brush electroplating has several advantages over tank plating, including portability, ability to plate items that for some reason can't be tank plated (one application was the plating of portions of very large decorative support columns in a building restoration), low or no masking requirements, and comparatively low plating solution volume requirements. Disadvantages compared to tank plating can include greater operator involvement (tank plating can frequently be done with minimal attention), and inability to achieve as great a plate thickness..

Cleanliness Cleanliness is essential to successful electroplating, since molecular layers of oil can prevent adhesion of the coating. ASTM B322 is a standard guide for cleaning metals prior to electroplating. Cleaning processes include solvent cleaning, hot alkaline detergent cleaning, electrocleaning, and acid etch. The most common industrial test for cleanliness is the waterbreak test, in which the surface is thoroughly rinsed and held vertical. Hydrophobic contaminants such as oils cause the water to bead and break up, allowing the water to drain rapidly. Perfectly clean metal surfaces are hydrophilic and will retain an unbroken sheet of water that does not bead up or drain off. ASTM F22 describes a version this test. This test does not detect hydrophilic contaminants, but the electroplating process can displace these easily since the solutions are water-based. Surfactants such as soap reduce the sensitivity of the test, so these must be thoroughly rinsed off.

History Some scientists believe that artifacts found in Iraq which date from circa 200 BC are Baghdad Battery and possibly used for electroplating. Other scientists are skeptical of this explanation for the artifacts, but in theory the principle is possible.

Modern electrochemistry was invented by Italian chemist Luigi V. Brugnatelli in 1805. Brugnatelli used his colleague Alessandro Volta's invention of five years earlier, the voltaic pile, to facilitate the first electrodeposition. Unfortunately, Brugnatelli's inventions were repressed by the French Academy of Sciences and did not become used in general industry for the following thirty years.

By 1839, scientists in United Kingdom and Russia had independently devised metal deposition processes similar to Brugnatelli's for the copper electroplating of printing press plates. Soon after, John Wright (inventor) of Birmingham, England discovered that potassium cyanide was a suitable electrolyte for gold and silver electroplating. Wright's associates, George Elkington and Henry Elkington were awarded the first patents for electroplating in 1840. These two then founded the electroplating industry in Birmingham, England from where it spread around the world.

As the science of electrochemistry grew, its relationship to the electroplating process became understood and other types of non-decorative metal electroplating processes were developed. Commercial electroplating of nickel, brass, tin, and zinc were developed by the 1850s. Electroplating baths and equipment based on the patents of the Elkingtons were scaled up to accommodate the plating of numerous large scale objects and for specific manufacturing and engineering applications.

The plating industry received a big boost from the advent of the development of electric generators in the late 1800s. With the higher currents available metal machine components, hardware, and automotive parts requiring corrosion protection and enhanced wear properties, along with better appearance, could be processed in bulk.

The two World Wars and the growing aviation industry gave impetus to further developments and refinements including such processes as, hard chromium plating, bronze alloy plating, sulfamate nickel plating, along with numerous other plating processes. Plating equipment evolved from manually operated tar-lined wooden tanks to automated equipment, capable of processing thousands of pounds per hour of parts.

One of American physicist Richard Feynman's first projects was to develop technology for electroplating metal onto plastics. Feynman successfully developed this technology, allowing his employer to keep commercial promises he had made but could not have fulfilled otherwise.Richard Feynman, Surely You're Joking, Mr. Feynman! (1985), in chap. 6: "The Chief Research Chemist of the Metaplast Corporation"

Electroplating is one of the three processes that form the LIGA-process used to manufacture MEMS devices.

See also

• gilding
• electropolishing
• anodization
• industrial etching
• electrochemistry

Notes and references

• {{cite book

| first = James B. | last = Mohler | authorlink = | coauthors = | year = 1969 | month = | title = Electroplating and Related Processes | chapter = | editor = | others = | edition = | pages = | publisher = Chemical Publishing Co. | location = | id = ISBN 0-8206-0037-7 | url = -->

External links

• Electrochemistry Encyclopedia article

Electroplating is the process of using electrical direct current to coat an electrically electrical conductivity object with a relatively thin layer of metal. The primary application of electroplating deposits a layer of a metal having some desired property (e.g., abrasion and wear resistance, corrosion protection, lubrication, improvement of aesthetic qualities, etc.) onto a surface lacking that property. Another application uses electroplating to build up thickness on undersized parts.

The process used in electroplating is called electrodeposition. It is analogous to a galvanic cell cell acting in reverse. The part to be plated is the cathode of the circuit. In one technique, the anode is made of the metal to be plated on the part. Both components are immersed in a solution called an "Electrolyte" containing one or more dissolved salt as well as other ions that permit the flow of electricity. A rectifier supplies a direct current to the cathode causing the metal ions in the electrolyte solution to lose their charge and plate out on the cathode. As the electrical current flows through the circuit, the anode slowly dissolves and replenishes the ions in the bath.{{cite book | last = Dufour | first = Jim | authorlink = | coauthors = | title = An Introduction to Metallurgy, 5th ed | publisher = Cameron | date = 2006 | location = | pages = IX-1 | url = | doi = | id = -->

Other electroplating processes may use a nonconsumable anode such as lead. In these techniques, ions of the metal to be plated must be periodically replenished in the bath as they are drawn out of the solution.Dufour, IX-2.

Process bar and the cathode is an iron spoon.

The anode and cathode in the electroplating cell are connected to an external supply of direct current, a battery or, more commonly, a rectifier.The anode is connected to the positive terminal of the supply, and the cathode (article to be plated) is connected to the negative terminal.When the external power supply is switched on, the metal at the anode is oxidation from the zero valence (chemistry) state to form cations with a positive charge.These cations associate with the anions in the solution. The cations are reduced at the cathode to deposit in the metallic, zero valence state. Example: In an acid solution, Copper is oxidized from an anode to Cu2+ by losing two electrons. The Cu2+ associates with the anion SO42- in the solution to form copper sulfate. At the cathode, the Cu2+ is reduced to metallic Cu by gaining two electrons. The result is the effective transfer of Cu from the anode source to a plate covering the cathode.

The plating is most commonly a single metallic chemical element, not an alloy. However, some alloys can be electrodeposited, notably brass and solder.

Many plating baths include cyanides of other metals (e.g., potassium cyanide) in addition to cyanides of the metal to be deposited. These free cyanides facilitate anode corrosion, help to maintain a constant metal ion level and contribute to conductivity. Additionally, non-metal chemicals such as carbonates and phosphates may be added to increase conductivity.

When plating is not desired on certain areas, stop-offs are applied to prevent the bath from coming in contact with the substrate. Typical stop-offs include tape, foil, lacquers, and waxes.Dufour, IX-3.

Strike Initially, a special plating deposit called a "strike" may be used to form a very thin (typically less than 0.5 Thou (unit of length) thick) plating with high quality and good adherence to the substrate. This serves as a foundation for subsequent plating processes. A strike uses a high current density and a bath with a low ion concentration. The process is slow, so more efficient plating processes are used once the desired strike thickness is obtained.

The striking method is also used in combination with the plating of different metals. If it is desirable to plate one type of deposit onto a metal to improve corrosion resistance but this metal has inherently poor adhesion to the substrate, a strike can be first deposited that is compatible with both. One example of this situation is the poor adhesion of electrolytic nickel on zinc alloys, in which case a copper strike is used, which has good adherence to both.Dufour, IX-2.

Current density The current density (amperage of the electroplating current divided by the surface area of the part) in this process strongly influences the deposition rate, plating adherence, and plating quality. This density can vary over the surface of a part, as outside surfaces will tend to have a higher current density than inside surfaces (e.g., holes, bores, etc.). The higher the current density, the faster the deposition rate will be, although there is a practical limit enforced by poor adhesion and plating quality when the deposition rate is too high.

While most plating cells use a continuous direct current, some employ a cycle of 8–15 seconds on followed by 1–3 seconds off. This allows high current densities to be used while still producing a quality deposit. In order to deal with the uneven plating rates that result from high current densities, the current is even sometimes reversed, causing some of the plating from the thicker sections to re-enter the solution. In effect, this allows the "valleys" to be filled without over-plating the "peaks." This is common on rough parts or when a bright finish is required.Ibid.

Brush electroplating A closely-related process is brush electroplating, in which localized areas or entire items are plated using a brush saturated with plating solution. The brush, typically a stainless steel body wrapped with a cloth material that both holds the plating solution and prevents direct contact with the item being plated, is connected to the positive side of a low voltage direct-current power source, and the item to be plated connected to the negative. The operator dips the brush in plating solution then applies it to the item, moving the brush continually to get an even distribution of the plating material. The brush acts as the anode, but typically does not contribute any plating material, although sometimes the brush is made from or contains the plating material in order to extend the life of the plating solution.

Brush electroplating has several advantages over tank plating, including portability, ability to plate items that for some reason can't be tank plated (one application was the plating of portions of very large decorative support columns in a building restoration), low or no masking requirements, and comparatively low plating solution volume requirements. Disadvantages compared to tank plating can include greater operator involvement (tank plating can frequently be done with minimal attention), and inability to achieve as great a plate thickness..

Cleanliness Cleanliness is essential to successful electroplating, since molecular layers of oil can prevent adhesion of the coating. ASTM B322 is a standard guide for cleaning metals prior to electroplating. Cleaning processes include solvent cleaning, hot alkaline detergent cleaning, electrocleaning, and acid etch. The most common industrial test for cleanliness is the waterbreak test, in which the surface is thoroughly rinsed and held vertical. Hydrophobic contaminants such as oils cause the water to bead and break up, allowing the water to drain rapidly. Perfectly clean metal surfaces are hydrophilic and will retain an unbroken sheet of water that does not bead up or drain off. ASTM F22 describes a version this test. This test does not detect hydrophilic contaminants, but the electroplating process can displace these easily since the solutions are water-based. Surfactants such as soap reduce the sensitivity of the test, so these must be thoroughly rinsed off.

History Some scientists believe that artifacts found in Iraq which date from circa 200 BC are Baghdad Battery and possibly used for electroplating. Other scientists are skeptical of this explanation for the artifacts, but in theory the principle is possible.

Modern electrochemistry was invented by Italian chemist Luigi V. Brugnatelli in 1805. Brugnatelli used his colleague Alessandro Volta's invention of five years earlier, the voltaic pile, to facilitate the first electrodeposition. Unfortunately, Brugnatelli's inventions were repressed by the French Academy of Sciences and did not become used in general industry for the following thirty years.

By 1839, scientists in United Kingdom and Russia had independently devised metal deposition processes similar to Brugnatelli's for the copper electroplating of printing press plates. Soon after, John Wright (inventor) of Birmingham, England discovered that potassium cyanide was a suitable electrolyte for gold and silver electroplating. Wright's associates, George Elkington and Henry Elkington were awarded the first patents for electroplating in 1840. These two then founded the electroplating industry in Birmingham, England from where it spread around the world.

As the science of electrochemistry grew, its relationship to the electroplating process became understood and other types of non-decorative metal electroplating processes were developed. Commercial electroplating of nickel, brass, tin, and zinc were developed by the 1850s. Electroplating baths and equipment based on the patents of the Elkingtons were scaled up to accommodate the plating of numerous large scale objects and for specific manufacturing and engineering applications.

The plating industry received a big boost from the advent of the development of electric generators in the late 1800s. With the higher currents available metal machine components, hardware, and automotive parts requiring corrosion protection and enhanced wear properties, along with better appearance, could be processed in bulk.

The two World Wars and the growing aviation industry gave impetus to further developments and refinements including such processes as, hard chromium plating, bronze alloy plating, sulfamate nickel plating, along with numerous other plating processes. Plating equipment evolved from manually operated tar-lined wooden tanks to automated equipment, capable of processing thousands of pounds per hour of parts.

One of American physicist Richard Feynman's first projects was to develop technology for electroplating metal onto plastics. Feynman successfully developed this technology, allowing his employer to keep commercial promises he had made but could not have fulfilled otherwise.Richard Feynman, Surely You're Joking, Mr. Feynman! (1985), in chap. 6: "The Chief Research Chemist of the Metaplast Corporation"

Electroplating is one of the three processes that form the LIGA-process used to manufacture MEMS devices.

See also

• gilding
• electropolishing
• anodization
• industrial etching
• electrochemistry

Notes and references

• {{cite book

| first = James B. | last = Mohler | authorlink = | coauthors = | year = 1969 | month = | title = Electroplating and Related Processes | chapter = | editor = | others = | edition = | pages = | publisher = Chemical Publishing Co. | location = | id = ISBN 0-8206-0037-7 | url = -->

External links

• Electrochemistry Encyclopedia article

Phoenix Electroplating Ltd
Phoenix Electroplating Ltd - Hard Chrome and Nickel Deposition Specialists

Phoenix Electroplating Ltd, Environment
Environment. Phoenix Electroplating is dedicated to protecting the environment and aims to reduce its impact on the environment as much as possible.

Electroplating - Wikipedia, the free encyclopedia
Electroplating is the process of using electrical current to reduce cations of a desired material from a solution and coat a conductive object with a thin layer of the material ...

Frost Electroplating
Frost Electroplating is a specialist subcontract reel-to-reel, barrel and rack plater of gold, silver, tin, electroless nickel & copper based in Birmingham, UK. Frost has the ...

R&S Electroplating Limited
Offers all types of metals including nickel, copper, chrome, brass and silver.

Trenton Electroplating
Trenton Electroplating are specialists in zinc and zinc alloy plating . ... Telephone : 01527 64200 . Facsimile : 01527 66187 . E-mail : info@trentonplating.co.uk

Best Electroplating - Decorative and technical plating services ...
Welcome to Best Electroplating : Best Electroplating began trading in 1973 and the experience gained in these years has produced a highly professional ...

Best Electroplating - Decorative and technical plating services ...
Contact Best Electroplating : To contact us please use one of the methods below. Contact: Mark Eaton - (Proprietor)

Gold plating, silver plated, brush electroplating kits
Gold and silver mobile brush plating opportunity. FAQs, details of training and equipment, with contacts for further details.

Electropolishing and Electroplating Plant Equipment, UK - Balco ...
Manufacturers of electroforming and electropolishing plant equipment, including anodising, polishing and dust extraction systems. Includes full product list.